capable of reliable operations on smooth, rough, matt, or shiny web surfaces. This sensor is especially good in applications that have low color contrast between the background and the printed line, and particularly useful when guiding to the edge of a clear film web on a roller or backup plate.
The SE-26 will guide line widths from 0.04" to 0.10" (1 mm to 2.5 mm) with a narrow clear margin of only 0.10" (2.5 mm) on both sides of the line. This reflected light-type sensor contains the light source and receiver located in a common housing. Light is reflected from the surface of the web back through the lens to a dual solar cell receiver where an internal cell automatically compensates for changes in light intensity.
- See a Deacro C610A with Fife SE-26 Line Guide Sensors at Pack Expo 2006 GO>>
Key Features:
- Small, lightweight sensor for guiding to the center or edge of a line.
- Especially good in applications where contrast between background and printed line is low.
- Provides reliable operation for glossy, reflective or shiny materials.
- Lens position may be altered to allow the sensor to operate at 90º from standard.
- Flexible mounting and positioning assemblies ensure quick and easy installation
- Electrostatic discharge protection.
Additional Specifications:
Light Footprint:
0.06" x 0.20" (1.5 mm x 5.1 mm)
Focus Distance:
0.32" (8 mm)
Weight:
14 oz (396.9 grams)
32 oz (907.2 grams) with M-20 mounting bracket
Temperature Range:
32º to 122º F (0º to 50º C)
Back_to_products |
